Lubes/Cleaners

- PLUSH Suspension Oil - Formulated specifically for mountain bike suspensions - Designed for use in both forks and shocks - Reduces stiction and running friction - Consistent damping performance at any temperature - Proprietary additive system minimizes oxidation, corrosion and wear - Designed to protect seals and extend time between rebuilds

Chill Zone™ is arguably the industry's most advanced rust-busting penetrating lubricant. It simply works like magic! Before giving up on a frozen crank bolt, a rusted derailleur spring, a seized seat post, or discarding your rusted chain, give Chill Zone™ a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. A special refrigerant propellant freezes metal to as low as -50°F/-45°C. This causes contraction of the metal and creates micro-cracks in the corrosion and galvanically fused metal parts. A penetrating release agent then breaks down and flushes out the rust. With Chill Zone, most seized parts regain full functionality.

Recommended by DT Swiss for lubrication of Ratchet mechanisms found in DT's Ratchet, Ratchet EXP and Ratchet LN hubs

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

Buzzy's Slick Honey has a superior ability to reduce sliding friction, making it ideal for lubricating o-rings, seals, bushings, and any other sliding or pivoting parts. Try it on your bike and you'll see why major suspension fork manufacturers like Rock Shox, Fox Racing and White Brothers use Slick Honey in their service departments.

Fills gaps and helps retain non-threaded parts like Press-fit bottom bracket parts, sealed bearings etc. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

- The factory standard grease for leading bike and bearing manufacturers that exceeds the unique and demanding requirements of bicycle bearings - Prevents wear and distortion in headsets, hubs, and bottom brackets

Park's Chain Gang contains everything needed to quickly and easily clean chains, cassette/freewheel cogs and chainrings so that your shifting works perfectly and your parts last and last. You get Park's Cyclone Chain Scrubber, GearClean Brush, and their CB-2 Citrus ChainBrite (8-ounce bottle). Simply fill the Cyclone Chain Scrubber to the line with ChainBrite, snap the cleaner onto the chain, hold the cleaner's handle and pedal your bike by hand. Like magic, the brushes inside the cleaner turn and scrub the chain clean (a magnet in the bottom retains any metal bits that come off the links). Then to finish the job, simply use Park's brush and some rags to clean the cogs and chainrings.