29-Inch

In the early design phases of our Traverse Fattie 29, we recognized that the number of aluminum wheels that had the prowess to both shred rowdy descents and to provide the efficiency required of our Northern California testing grounds' relentless climbs were far and few between. We also came to realize that trail riders expect certain features in a proper, send-it-ready wheelset. And for the price, we found that alloy hit many of these expectations, while also keeping enough jingle-jangle in your wallet for a post-ride beverage. Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. We took the traditional 19- to 23-millimeter standard and moved it out to what we found worked best in testing—a whopping 30mm “Fattie” width. A wide rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, it affords you the ability to run lower pressures, and it spreads impact out over a larger surface area to reduce the risk of damage. We also added our Zero Bead hook design to the mix, and this ultimately aids in preventing “burps” during hard cornering, while also making tubeless set up quick and easy. After developing what we found to be the perfect alloy trail wheels, we went farther down the perfection path, hand-lacing the rims to our own alloy hubs that allow for the same spoke length throughout the entire wheelset, via 28 DT Swiss Revolution J-Bend spokes and Pro Lock nipples. Inside our hubs, you'll find sealed cartridge bearings and DT Swiss 360 rear internals that'll keep you rolling smoothly for miles. We also wanted to ensure that each wheel was built correctly, so we built them by hand. Each wheelset comes packaged with a SRAM XD-driver and a tubeless valve stem in order to make tubeless set-up a touch easier. Please note that Shimano freehubs are sold separately.

The new Stout XC SL 29 front wheel includes a strong, double-wall alloy rim, stainless steel spokes, brass nipples, and a reliable Shimano Center Lock hub. Charcoal decals complete the look, making this a perfect OE replacement or XC-ready upgrade. - Lightweight and reliable Shimano hub. - Double-wall, disc-specific rim is strong and durable. - Brass nipples hold spoke tension securely and resist rust for added durability. - Stainless spokes won't rust, easing long-term maintenance.

It’s not often that “affordable” and “carbon” appear in the same sentence, but our Control 29 Carbon wheelset was designed to change that. Utilizing many of the same techniques used in the development of the SL iteration of the Control 29, these wheels provide the lightweight XC performance you need at a more attainable price. Creating a successful XC wheelset isn't as easy as you might think. Often times, keeping a wheel light, stiff, and strong requires an unlimited budget. So when we were asked to create a wheel that had low inertia and weight, but was also affordable, strong enough to take on rocks and roots, and wide enough to optimize traction and rolling resistance, we knew that we had our work cut out for us. We started with the notion of keeping these wheels as close to their SL brethren as possible. And with this, we explored what made the SLs so awesome in the first place, and then we implemented nearly every aspect of them. Starting with the rim, we kept our renowned Zero Hook Bead that allows for continuous fiber layup across the sidewall and rim bed. We then paired it with a wide 25-millimeter internal profile that makes it resilient to impact and creates a tire profile that’s conducive to low rolling resistance and incredible traction. On the trail, these technical traits translate to a wheelset that many XC riders have grown to love—quick accelerations on punchy climbs, swift stopping that lets you leave braking till the last second, and unprecedented reliability. Combine this with the easy to set up our 2Bliss Ready system and you have a reliable XC wheelset that’s as easy to climb on as it is to work on. To go along with the rim, we made sure to keep the lightweight, reliable, and affordable features in mind when building the wheelset, so we took DT Swiss 350 Classic hubs (15x110mm thru-axle front / 12x148mm thru-axle rear) and hand-laced them with 28 DT Swiss Competition Race spokes. Finding hand-built wheels is becoming more and more difficult, but we're fully invested in the power of the human touch. When a wheel is machine-built, there are certain margins of error that are built into the system that result in inconsistencies. With a real person building your wheels, however, you're sure to get a wheelset that's free of imperfections. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design, black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 25mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear - Spoke Type: DT Swiss Competition Race J-bend - Nipple Type: DT Swiss Alloy Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD end caps. - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, 12x148mm, includes SRAM XX1 XD freehub. - Includes 31mm OD end caps for front hub - Bearing Type: Sealed cartridge - Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1610g

Designed to handle everything from backcountry rock gardens to heavy days at the bike park, the Traverse is the definitive all-mountain wheel. A super-light, super-tough alloy rim is combined with refined and ultra-dependable hub and spoke technology for a wheel that can conquer any mountain. - Rim Type: Traverse Alloy, 29, Disc Brake, Tubeless Ready, Zero Bead Hook Design - Rim Details: 22mm Depth, 34mm External Width, 30mm Internal Width - Hub: Roval Step Flange Hub (SP19151/JFM02R) 6-Bolt, DT Swiss Ratchet LN 18t (20 deg), 110x15mm & 148x12mm thru-axle, SRAM XD Freebub, (Convertible freehub and endcaps) - Bearing Type: Sealed Steel Cartridge Bearing - Spokes: DT Swiss Competition Race J-Bend, Front: Two-Cross 28 count, L: DS 283mm, R: 283mm; Rear: Two-cross 28 count, L: DS 283mm NDS 283mm - Nipple: DT Swiss Hex Prolock Brass 2.0x14mm - Tire Size: 1.95" – 3.0"; Max Pressure: 40 psi - Weight: Wheelset 1,870g (including tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; to the last nipple turn - Extras: 19 and 31mm OD end cap options included, Roval tubeless tape and tubeless valve, Spare Spoke and Nipple Kit - System Weight Limit: 240lbs / 109kg