Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Packs/Racks/Baskets

$24.99
- Made in U.S.A. (Maysville, KY) - Shallow baskets carry notebooks, boxes or other articles that lie flat - Dimensions: 15 x 10 x 4.75 inches; the basket tapers to 13 x 8 inches at the bottom - Extended handlebar clamps fit 7/8" and 1" diameter handlebars, and 1 3/4" apart to offer clearance for shift and brake cables - Baskets have 2-piece legs which extend from 14 inches to 22 inches and mount to either the axle or fork eyelets on bikes with quick release front hubs - 1372 has a Zinc plated finish; 1372GB has a Black Powder Coat Finish - Complete basket with fittings weighs 2.2 lbs.
$49.99 - $79.99
The Giant Delivery basket is one of the most enduring and iconic products in Wald's catalog. Popular among messengers and paperboys (feel free to ask your father or grandfather about this noble profession), this basket is designed to carry large loads thanks to its stout legs, cargo bands, and heavy-duty handlebar clamps. - Made in U.S.A. (Maysville, KY) - Great for delivery, industrial bikes and hauling large loads - Reinforcement bands add extra strength - this basket is built for rugged use - Dimensions: 21 x 15 x 9 inches; the basket tapers to 18.25 x 12.25 at the bottom - Extended handlebar clamps allow greater clearance for shift and brake cables. They are 3 5/8" apart and fit 7/8", 1" and 31.8mm diameter handlebars - Legs extend from approx. 14 1/2 inches to 23 inches and have two mounting holes for mounting to either the axle or fork eyelets for bikes with quick release front hubs - 157B has a Zinc plated finish and 157GB has a Black Powder Coat Finish - Complete basket with fittings weighs 7.8 lbs.
$52.99
This front basket system uses a bolt-on handlebar mount to allow for quick and easy removal of the basket itself. - Extended handlebar clamps allow greater clearance for shift and brake cables - Requires 3.5" of handlebar clearance for mount - Fits 7/8" to 31.8mm handlebars - Made in USA - Dimensions: 11.75 x 8 x 9"
$29.99 - $39.99
This versatile basket is based on Wald's popular 133 basket but uses a holder that bolts onto your handlebar. The holder offers greater clearance between the bar and basket for shifters, cables, and brake levers. Available in white (3133WH) or gloss black (3133GB) powder coat finishes. - Made in U.S.A. (Maysville, KY) - A Quick Release Basket with Bolt-on Holder for stable installation and use - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14.5 x 9.5 x 9 inches; the basket tapers to 12.25 x 7 inches at the bottom - Holder designed to fit 7/8", 1" and 31.8mm diameter handlebar - Handlebar clamps are 2" apart and offer clearance for shift and brake cables - Powder Coat Finish - Complete basket including the holder weighs 3 lbs.
$24.99 - $49.99
The Wald 582 sets the standard for ingenuity when it comes to rear baskets. Mounting to the side of many rear racks, this nimble basket is the perfect size for packing 1-2 bags of groceries while balancing your load. When not in use, the base of the basket pivots up allowing the side walls to collapse. A simple clamp at the top keeps the basket out of your way when not in use. - Made in U.S.A. (Maysville, KY) - Baskets clamp to most rear racks up to 1/2" diameter - When not in use the base of the basket pivots up allowing the side walls to collapse making the collapsed basket 1" thick - A simple clamp at the top keeps the basket out of your way when collapsed - Extended basket is 12 3/4" front to back x 7 1/4" side to side x 8 1/2" deep - 582 Baskets have a Zinc Plated Finish; 582BL and 582WH Baskets have a Powder Coat Finish - Complete basket weighs 2.8 lbs.
$7.00
These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.
$59.95
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap onto your big-wheeled bike. It's made of tubular aluminum, fits most bikes with disc brakes, hauls up to 55 pounds and has a center strip that acts like a short fender. It's compatible with Topeak's QuickTrack bags and accessories (sold separately), too.
$74.95
Dual-molded side panels combine with flexible 600 denier fabric to form a semi-rigid, weather-resistant trunk bag. It features a divided main compartment with mesh side compartments and rear water bottle holder. The MTS Trunkbag EX attaches with integrated straps. - Capacity: 8L / 480 ci - Weight: 530g/1.17 pounds - Dimensions: 36 x 21 x 19 cm / 14.2" x 8.3" x 7.5" - Compartments: 1 divided main pocket, 2 mesh side pockets - Water bottle holder - Shoulder strap - Carrying handle - Elastic top bungees - 3M reflective strip - Safety light clip - Optional rain cover - Insulation: Rigid EVA foam - Bag attachment: Hook-and-loop fastener
$64.95
- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g
$129.95
Topeak's MTX TrunkBag DXP boasts a pop-up main compartment and expandable side panniers so it's capable of carrying plenty of gear. Plus it's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, bottle holder, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's Velcro straps make it a snap to attach to your rear rack (sold separately).
$139.95
Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material
$49.95
Get the most out of quick rides with a hip pack featuring quick, one-handed phone access and storage for essential tools or nutrition. - One-handed, behind the back access to a phone in a soft, structured pocket - Ride in comfort and descend with confidence with superior stability and breathable materials - Quickly access nutrition with side jersey pockets - Keep tools and accessories organized in dedicated internal pockets - Stay visible with a blinky-light attachment loop Technical specifications: - Dimensions: 8.66 x 2.36 x 5.91 in - Volume: 0.5 L - Weight: 0.5 lb - Material: Nylon
$129.95
Thule's multi-purpose Pack ’n Pedal Shield Panniers deliver on both visibility and cargo capacity. The Thule Shield pairs eye-catching reflective elements and multiple light attachment points for visibility, while the welded construction protects against both water and dust. It features interior pockets to keep items organized and a detachable shoulder strap for multiple carrying options.
$89.95
A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 28"/700c city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs
$145.00
Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g
$155.00
This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.
$12.99
Replacement Surly Bicycle Mounted Rack Parts - Direct replacement item for Surly racks - Replacement upper tubes, made from Stainless steel
$160.00
Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag
$9.99
Are you trying to carry an oddly-shaped item on your rack? Sunlite's Bungee Cargo Net will secure it for the ride home. It is 13 x 13 inches in size and the 4 vinyl coated hooks help secure it to your rack.
$14.99
Sunlite's Classic Flower Basket is just like the ones you remember as a kid. Made from weather-resistant plastic, it's tough, light and durable. It fits most handlebars and the flowers are removable. Carry your stuff in style.
$3.99 - $4.99
• Vinyl coated hooks • 9 mm diameter • Black
$100.00
The Globe Front Rack bolts directly to the two mounts on the head tube to create a tough-as-nails platform for carrying whatever your heart desires. By mounting directly to the bike frame, heavy loads can be distributed with minimal effect on handling and stability. It's also compatible with the Globe Haul's front and rear pannier adapters, allowing you to carry 5+ full grocery bags. The T-channel rail material means you can bolt on additional accessories to the sides to further customize your setup. It also accepts MIK accessories, like the MIK adapter & Turbo Basket, for fast and secure installation. - Designed for frictionless compatibility with Haul ST and Haul LT. - MIK accessory-compatible. - T-channel rail construction. - 20kg (44lb) load capacity. 30cm length, 32cm width - Installation requires tools (not included).
$100.00
These fork-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low position maximizes handling stability, and this front option leaves the rear rack open for carrying passengers or even more cargo options. *Third-party panniers are not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two adapters (one for each side of the fork) and all required hardware. - 8kg (18lb) load capacity per side. - All tools required for assembly included with the purchase of the Haul ST or Haul LT bike
$100.00
These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).
$50.00
All Globe racks are made with T-channel aluminum rails to maximize versatility, capability, and creativity. Many of our Globe-branded accessories mount directly to these channels, but they will also accept just about anything you can imagine bolting to them. To help unlock that possibility, the Rack Customization Kit provides an assortment of bolts and T-nuts compatible with our front and rear rack rails. Just BYO milk carton, wine crate, cooler, you name it! Two T-channel rail pieces can be used to increase the effective dimensions of your rack to provide a more secure platform for large or awkward gear. - Compatible with Globe Haul ST and Haul LT rear racks, and Globe Front Rack. - Includes two rack extension rails, eight T-nuts, and 12 assorted bolts. - All tools required for assembly are included with the purchase of the Haul ST or Haul LT bike.
$25.00
The MIK Adapter Plate is an ideal accessory if you want to carry your essential items around quickly and easily. It will unlock your ability to customize your storage options on your rack. It’s compatible with removable bicycle accessories and suitable for luggage carrier racks for the MIK system or MIK carrier plate. The MIK Adapter Plate is a must-have for your Vado, Como, or Tero. - Attaches to a wide variety of accessories, including the Turbo Basket and various Basil accessories. - Connects securely to MIK and MIK HD racks or the MIK carrier plate (not included). - 15kg max. load when used on the MIK HD rack. - Allows for fast and tool-less installation and removal. - Includes MIK stick key for increased security.
$25.00
So you like to keep your rig running minimalist but practical? Maybe you prefer to tape a spare tube and CO2 to your frame to keep the profile and weight low? The Bandit is the best of both worlds in terms of simplicity and utility for mountain riders. Its compact form bolts under your SWAT-compatible saddle and features a simple Velcro strap with individual compartments for tube, CO2, and tire lever. One rip of the strap and you’re in, with easy to access everything you need to fix a flat in the middle of a race, when time is of the essence. - Tough, lightweight, water-resistant Velcro strap. - Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts. - Individual compartments for a CO2 valve head, mountain tube, two-sided tire lever (included), and a 25g CO2 cartridge (not included) for compact and secure storage. - Tube, CO2 cartridge, and nozzle not included.
$90.00
- 15kg carrying capacity. - Folding design allows it to fold down to size of a pizza box. - Lightweight aluminum, 13mm rails. - Can carry any side pannier with hooks that fit 13mm rails or larger. - Additional platform on top allows for an extra bag.
$25.00
So you like to keep your rig running minimalist but practical? The Road Bandit is the best of both worlds in terms of simplicity and utility for road riders. The patent-pending Road Tube Spool was integrated into the design, making it extremely user friendly. Its compact form bolts under your SWAT-compatible saddle and features a simple, Velcro strap and securely holds your tube, CO2, CO2 nozzle and tire lever (included). One rip of the strap and you're in, with everything you need to fix a flat when time is of the essence. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Fits up to 80mm-long tube valve stems. - Holds a single threaded 16g CO2 cartridge. - Patent-pending Tube Spool allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber. - Tire lever and CO2 head included; tube and CO2 cartridge sold separately. - Tough, lightweight, water resistant Velcro strap. - Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts.
$50.00
The Roll Rack fits all Specialized Roll models, as well as most bikes with a 650b wheel size. The rack also features a maximum load capacity of 15kg, and it includes a steel bracket, hook plate, and corrosion-resistant hardware. - Fits all Specialized Roll models, as well as most bikes with a 650b wheel size. - Includes a steel bracket, hook plate, and corrosion-resistant hardware. - Maximum load capacity: 15kg
Page 1 of 3 Next page